NJOY Szünetmentes 30 KVA - Garun 30K (Online, RS232, USB, szoftver, 4,3" Touch LCD, 80x12V/9Ah, akkumulátor nélkül) ismertető Technology is power 3 Phases IN / 3 Phases OUT A 3 phase UPS is used for applications with high KW requirements due to their ability to distribute large quantities of power over a larger area and distance. 4.3' touch screen LCD The most important information about the UPS is displayed on the large 4.3’ touch screen LCD. You can check current state of the UPS or you can make the most advanced settings so all the things go smooth. Parallel operation up to 3 units The UPS system was created to offer great flexibility for a better cost management. Offers availability for future system adaptation, in case of additional load is required up to 3 UPSes can be installed in parallel and in need of increased back up time multiple battery cabinets can be added. The Garun Series is a three-phase range (which comprises power units and battery cabinets) designed with advanced features for special industrial applications that fits in the entire electrical architecture of a space or building. We recommend this UPS for commercial buildings power back-up architecture, management systems, security and fire protection, police or emergency dispatch centers, railway, data and IT application, commercial environments, transportation, medical equipment, industrial robots. Downtime costs for critical applications, in particular in industrial environments, are very high. These applications must remain in operation as long as possible, therefore both, the UPS and the battery cabinet, can accommodate batteries. Garun Series ranges from 10kVA to 80kVA. PN UP33TOP130KGAAZ01B EAN6422956009403 Power 30KVA / 30KW Type On-line Technology Three phase in / three phase out Nominal Input Voltage 3 x 400 VAC (3Ph+N) Nominal Output Voltage 3 x 360*/380/400/415 VAC (3Ph+N) Accepted Input Voltage Range 190-520 VAC (3-phase) @ 50% load 305-478 VAC (3-phase) @ 100% load Frequency 46 ~ 54Hz Outlets Terminal Block Wiring Transfer Time to Battery / AC Zero Typical Backup Time Depending on the number of batteries Communication Port RS232 / USB / EPO / SNMP / Modbus / AS400 (cards optional) Battery Type Sealed and leak proof maintenance Battery Specification Internal (not included): 32~80 pieces of 12V lead acid 7Ah or 9Ah External (optional): 12V lead acid, (N + N) pcs x 1~2 strings; N=16~20 Software ViewPower Network Edition and VMWare Shutdown Wizard Features On-line with double conversion Smart battery charger to optimize batteries performance Adjustable batteries design Output power factor 1.0 Optional isolation transformer DSP technology guarantees high performance Active power factor correction in all phases High Efficiency on AC mode up to 95.5% EPO function Maintenance bypass 4.3” large touch LCD display Power management over SNMP / Modbus / AS 400 card ECO mode operation for energy saving Dual Input for generator compatibility LCD Display UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions Efficiency AC Mode ≥ 95.5 % with fully charged batteries Battery Mode ≥ 94.5 % with fully charged batteries ECO Mode ≥ 98.5 % with fully charged batteries Environment < 95 % RH at 0-40ºC (non-condensing) Noise Level: Less that 60dB at 1 m Physical Dimensions Dimensions: 815 x 300 x 1000 mm Weight: 65 kg Compatibility With external battery pack (please refer to the Support section)
